Temperature And Sound Settings Of Soldering Station; Temperature Setting Method; Setting And Saving Of Temperature Points - SATA 02003 Manual Del Uso

5. Temperature and Sound Settings of Soldering Station

Caution:
1 ） The real-time temperature setting is available only when the entered password is correct or the password
is the default one "000" . Otherwise, the temperature of the soldering station can be neither changed nor
calibrated.
2） If you turn off the power switch while setting the temperature, the set temperature will not be saved.

5. 1 Temperature Setting Method

Temperature rise: The set temperature will rise by 1 ℃ by pressing the " ▲ " key, and the display window will display the set
temperature. After releasing the " ▲ " key, the display window will display the set temperature for about 2 seconds. If you
press the " ▲ " key within such delayed 2 seconds, the set temperature will rise by 1 ℃ . If you press and hold the " ▲ " key
for at least one second , the set temperature will rise rapidly, and when the desired set temperature is reached, you can
release the " ▲ " key.
Temperature reduction: The set temperature will drop by 1 ℃ by pressing the " ▼ " key, and the display window will display
the set temperature. After releasing the " ▼ " key, the display window will display the set temperature for about 2 seconds.
If you press the " ▼ " key within such delayed 2 seconds, the set temperature will drop by 1 ℃ . If you press and hold the
" ▼ " key for at least one second, the set temperature will drop rapidly, and when the desired set temperature is reached,
you can release the " ▼ " key.
Note: "5.1 Temperature Setting Method" only describes the method for setting temperature. If you want to save the current
set temperature, refer to 5.2.

5.2 Setting and Saving of Temperature Points

1 ） In working status, press the " ＊ " key twice to enter the temperature point setting window, which shows the
temperature set at the current temperature point.
2） After entering the temperature point window, press the " ＊ " key to switch between the three temperature points for
your selection as desired.
3） After selecting the temperature point, immediately press the " ▼ " or " ▼ " key to set its temperature.
4） To save the set temperature of the temperature point, be sure to press and hold the " ＊ " key after setting until the
window displays "
5） When the setting is locked by a password, only temperature point selection is accessible, and you cannot set the
specific temperature（including the temperature of the temperature point）. The specific operation is as follows:
After entering the temperature point setting window, press the " ＊ " key to select the temperature point for working,
and then about 2 seconds after the " ＊ " key is released, the station returns to the working state, and will work at
such temperature point.
20
02003
" , indicating that the temperature of the temperature point has been set.
中文
EN DE RU KO PT JA ES