Kit Assembly - Metra Electronics 95-8243B Instrucciones De Instalación

Double DIN radio provision
1. Attach the radio to the brackets
using the screws supplied with the
radio and mount into dash opening.
(Figure A)
2. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from Metra
and/or AXXESS.

Kit Assembly

3. Snap the radio trim panel over the
new radio and reassemble dash in
reverse order of disassembly. (It is
best to connect the factory vent
assembly to the radio housing
trim panel prior to installation.)
95-8243B
(Figure A)
3