Microsoft XBOX 360 Configuración Y Garantía página 5

POSiTiOn YOUR XBOX
you can position your console horizontally or
vertically, whichever you prefer. However, if you
change your console's orientation, make sure it is
turned off with no disc in the tray. However you
position your console, make sure to not block
any ventilation openings or the ir receiver.
PREVEnT ThE cOnSOLE fROm
fALLing
if the Xbox 360 console falls and hits someone,
especially a small child, it could cause serious injury.
to reduce the risk of such injuries and damage to the
Xbox 360 console, set up the console according to
these instructions. place the console on a surface that:
• Is flat and level.
• is stable and not likely to tip over.
• allows all feet of the console to be in contact with
the surface.
• is not likely to allow the console to slip or slide off.
• is clean and free of dust and debris.
if the surface or console feet become dirty or
dusty, clean them with a dry cloth. if the console is
positioned vertically, put it on a surface where it is not
likely to fall if it tips over.
arrange all cables and cords so that people and pets
are not likely to trip over or accidentally pull on them
as they move around or walk through the area.
when the console is not in use, you may need to
disconnect all cables and cords from the front and rear
of the console to keep them out of the reach of children
and pets. Do not allow children to play with cables and
cords.
Prevent the console from
Overheating
Do not block any ventilation openings on the console
or power supply. Do not place the console or power
supply on a carpet, bed, sofa, or other soft surface
that may block ventilation openings. Do not place the
console or power supply in a confined space, such as
a bookcase, rack, or stereo cabinet, unless the space is
well ventilated. Don't stack any items, including other
aV equipment, on top of the console.
Do not place the console or power supply near any
heat sources, such as radiators, heat registers, stoves,
or amplifiers.
Avoid Smoke and dust
Do not use the console in smoky or dusty locations.
Smoke and dust can damage the console, particularly
the disc drives.
x172359901MNL.indd 3
cOnnEcT TO YOUR TV
Connect your composite aV cable to your tV.
connect the AV cable
To connect to your TV:
Connect the composite aV cable connector to
1
the aV port on the console.
Connect the yellow-banded composite
2
connector on the cable to the yellow video
input on your tV.
Connect the solid color white and red (left and
3
right) audio connectors on the cable to the
white and red audio inputs on your tV.
for mono audio, connect either the white or
red audio connector to the single audio input.
Select the appropriate video input for your tV.
4
Common names for video input include input
Select, input, auX, line in, line, in, Source, and
eXt.
Other input
you can also connect to additional tV input types
such as component, HDMi, Vga, or digital audio
(cables sold separately). for more information,
visit www.xbox.com/setup.
IMPORTANT
Stationary images in video games can "burn" into
some tV screens, creating a permanent shadow.
Consult your tV owner's manual or manufacturer
before playing games.
3
12/6/2010 3:36:41 PM