Connect To Power - Microsoft XBOX 360 Configuración Y Garantía

cOnnEcT TO POWER

always connect the power cords according to the
following instructions.
To connect the power cords:
fully insert the power supply cord into the
1
Xbox 360 console.
plug the aC power cord into the power supply
2
until it stops.
plug the other end of the aC power cord into
3
the wall outlet. Connecting to a power strip
or extension cord is not recommended. the
power supply light will glow amber when
properly connected to power and the console
is turned off.
4
x172359901MNL.indd 4
ELEcTRicAL SAfETY
as with many other electrical devices, failure to take
the following precautions can result in serious injury
or death from electric shock or fire or damage to the
Xbox 360 console.
Select an appropriate power source for your Xbox 360
console:
• use only the power supply unit and aC power cord
that came with your console or that you received
from an authorized repair center or Xbox Customer
Support. if you are not sure if you have the correct
power supply unit, compare the model number
on the power supply unit with the model number
specified on your console. If you need a replacement
power supply unit or AC power cord, you can find
Xbox Customer Support contact information at
www.xbox.com/support.
• Confirm that your electrical outlet provides the type
of power indicated on the power supply unit (in terms
of voltage [V] and frequency [Hz]). if you are not sure
of the type of power supplied to your home, consult a
qualified electrician.
• Do not use non-standard power sources, such as
generators or inverters, even if the voltage and
frequency appear acceptable. use only aC power
provided by a standard wall outlet.
• Do not overload your wall outlet, extension cord,
power strip, or other electrical receptacle. Confirm
that they are rated to handle the total current (in
amps [a]) drawn by the Xbox 360 console (indicated
on the power supply unit) and any other devices that
are on the same circuit.
• Do not connect any other devices between the power
supply unit and the Xbox 360 console or between the
power cord and the power supply unit.
to avoid damaging the power cords and power
supply:
• protect the power cords from being walked on.
• protect cords from being pinched or sharply bent,
particularly where they connect to the power
outlet, the power supply unit, and the console.
• Do not jerk, knot, sharply bend, or otherwise abuse
the power cords.
• Do not expose the power cords to sources of heat.
• Do not wrap power cords around the power supply
unit.
• Keep children and pets away from the power cords.
Do not allow them to bite or chew on them.
• when disconnecting the power cords, pull on the
plug—do not pull on the cord.
• Do not let the power supply unit hang from either
power cord.
if a power cord or power supply unit becomes
damaged in any way, stop using it immediately. Visit
www.xbox.com/support for Xbox Customer Support
contact information.
unplug your Xbox 360 console during lightning
storms or when unused for long periods of time.
12/6/2010 3:36:42 PM