Important Introductory Recommendations And Usage Information Of 19" Wall-Mount Cabinets; Introduction; Compliance With Legal And Regulatory Provisions Regarding Safety And The Environment; Packaging Contents - Lanberg WF01 64 V2 Manual De Instrucciones

1. Important introductory recommendations and usage information of 19" wall-mount cabinets

1.1 Introduction

PLEASE SAVE THIS MANUAL - it contains a set of recommendations, guidelines, safety rules, restrictions and operating instructions of
Lanberg's 19" wall-mount cabinets, detailing the models supported below:
• WF01-6404-10B
• WF01-6404-10S
• WF01-6604-10B
• WF01-6604-10S
• WF01-6406-00B
• WF01-6406-00S
• WF01-6406-10B
• WF01-6406-10S
Manual also contains logistic and technical data, instructions, and regulations that must be observed and complied with during
transport, assembly, use, and potential maintenance of the products. Under no circumstances should you use the device before
carefully reading and fully adapting to all information in the user's manual. Keep this manual for future reference. All photos, illustrations
contained in the instructions are for reference only. The information contained in this manual has been verified and is considered
sufficient. The supplier is not responsible for any inaccuracies that may be included in this document, nor is he responsible for updating
or keeping the current information in this manual, nor for notifying its users or organization about the updates. In particular, Lanberg
owners are not responsible for any equipment, software, or data stored/used with the product, including maintenance, replacement,
integration, installation, or recovery of hardware, software, or data in the event of misuse of the product or its components.
Lanberg brand owners reserve the right to make changes to this manual at any time without notice. The products mentioned in this
manual, including the documentation, are the property of the Lanberg brand owners and its licensors. Any use or reproduction of
these products, including documentation, is prohibited, except as expressly authorized under the appropriate license terms.
NOTE: For the most up-to-date version of this manual, please visit our website at www.lanberg.eu.

1.2 Compliance with legal and regulatory provisions regarding safety and the environment

This product complies with EU safety and environmental regulations.
The products listed in the following instructions have been approved for trading within the EU, by obtaining a European Union
Declaration of Conformity, which contains a declaration with the essential requirements and other relevant provisions of the following
Directives, and that the following harmonized standards have been applied.
Directive: RoHS 2011/65/UE + 2015/863/UE
Standards: IEC 62321-4:2013 + A1:2017; IEC 62321-5:2013;
IEC 62321-6:2015; IEC 62321-7-2:2017; IEC 62321-8:2017;
With the development of products and updates to CE regulations, the declaration may change. The latest declaration of conformity
(CE) can be found at: www.lanberg.eu.
NOTE: The use of the WEEE symbol (crossed-out wheelie bin symbol) means that this product cannot be treated as household waste.
Proper disposal of used equipment avoids risks to human health and the environment, resulting from the possible presence of
hazardous substances, mixtures, and components in the equipment, as well as improper storage and processing of such equipment.
The selective collection also allows you to recover materials and components, from which the device was manufactured. For more
information about the recycling of this product, please contact the retail outlet, where the product was purchased, or request
information from the local authority.

1.3 Packaging contents

The following items should be provided in the shipping packaging:
• (1x) Front door with 2 grounding pins.
• (2x) Side frame with attached side panel equipped with 2 latches.
• (1x) Top cover with cable entry and 2 holes in the middle for 12x12 cm fans.
• (2x) Flat blank panel for top and bottom cable entry panel.
• (1x) Rear cabinet cover.
• (4x) Vertical mounting rails with "U" numbered height to install Rackmount devices.
• (1x) Wall-mount rail.
• Essential installation accessories in a string bag: (16x) M4*8 self-tapping Phillips screws; (8x) M5*8 self-tapping Phillips screws; (8x)
M6*12 Phillips screws; (1x) plastic washer; (1x) grounding kit (wire, washers, nuts); (1x) front door lock with keys and flat metal latch;
(2x) side door lock with keys and curved metal latch; (12x for size < 10 U; 24x for size >= 10 U) M6*12 Phillips screws with M6 Cage
nut; (1x) printed user's manual.
• (1x) Bottom cover with cable entry and 4 holes with M10 threaded nut on the sides and 2 grounding pins.
14
• WF01-6606-00B • WF01-6609-00B
• WF01-6606-00S • WF01-6609-00S
• WF01-6606-10B • WF01-6609-10B
• WF01-6606-10S • WF01-6609-10S
• WF01-6409-00B • WF01-6412-00B
• WF01-6409-00S • WF01-6412-00S
• WF01-6409-10B • WF01-6412-10B
• WF01-6409-10S • WF01-6412-10S
Lanberg © 2015-2021
• WF01-6612-00B • WF01-6418-10B
• WF01-6612-00S • WF01-6418-10S
• WF01-6612-10B • WF01-6618-10B
• WF01-6612-10S • WF01-6618-10S
• WF01-6415-10B • WF01-6422-10B
• WF01-6415-10S • WF01-6422-10S
• WF01-6615-10B • WF01-6622-10B
• WF01-6615-10S • WF01-6622-10S
• WF01-6427-10B
• WF01-6427-10S
• WF01-6627-10B
• WF01-6627-10S
EN