Installation Of Side Frames With Top And Bottom Cover - Lanberg WF01 64 V2 Manual De Instrucciones

4. Use 2 numbered vertical mounting rails [G] and choose the
same distance as in point 2. on the right side frame [C].
It is vital to make sure that the numbering of the front
i
vertical rails is in ascending order from left to right (see the
provided illustrations). Rear vertical rails also have to be
mounted the same way.
5. Use a total of 4 M5*8 self-tapping Phillips screws [J] to attach
the vertical mounting rails to the side frame - 2 screws for
each end of the rail.

2.2.4. Installation of side frames with top and bottom cover

1. Prepare the bottom cover [R] so that the cable entry is at the back.
2. Place the left side frame [B] on the left side of the bottom cover and the rightside frame [C] on the right side of the cover.
i
Before proceeding with the next assembly step, make sure that:
I) The height numbering is ascending from bottom to top cover on the front and rear vertical mounting rails.
II) The pairs of opposite rails are mounted on the same lengths.
Height
indication
EN
Back
Lanberg © 2015-2021
Front
Back
Front
19