Installation; Installation Considerations - Commercial Electric 17898 Guía De Uso Y Cuidado

Installation

1

Installation considerations

□
How will you run and conceal the wires to your LED tape lighting?
□
□
Temporarily mounting the LED light strip using painter's tape allows you to experiment with tape light positioning before
permanent installation.
2
Connecting LED tape and adaptor
Use the following four ways to connect the LED tape and adapter according to installation requirements.
□
.
Connect LED tape to connector
.
Connect connector to LED tape
.
Connect LED tape to LED tape
.
Connect connector to connector
Connect LED tape to connector
NOTE: Connect LED tape to connector by aligning at the
+12V on the LED tape and the arrow on the connector.
+12V
R
G
B
W
Connect LED tape to LED tape
NOTE: Connect LED tape to LED tape by aligning at the
+12V on the LED tape.
+12V
R
G
B
W
+12V
R
G
B
W
IMPORTANT: Using painter's tape or masking tape,
temporarily place the LED light strip into your desired
mounting position. Power on the LEDs to make sure you are
achieving the desired lighting effect before removing the 3M
Connect connector to LED tape
NOTE: Connect connector to LED tape by aligning at the
arrow on the connector and the +12V on the LED tape
Connect connector to connector
NOTE: Connect connector to connector by aligning at
the arrows on the connectors.
5
Please contact 1-877-527-0313 for further assistance.
+12V
R
G
B
W
HOMEDEPOT.COM