Operation; Using The Remote; Changing The Battery - Commercial Electric 17898 Guía De Uso Y Cuidado

Maintenance

Operation

1

Using the remote

Direct the remote (D) towards the infrared receiver (C) to change RGBW colors of the strip.
□
A B
OFF ON
R G B
WW
Flash
Strobe
Fade
Smooth
NOTE:
2

Changing the battery

To replace the battery, unscrew the small screw on the back side of the remote (D), and refer to the diagram on the back side of
□
the remote.
OFF ON
R G B
WW
Flash
Strobe
Fade
Smooth
□ Always purchase the correct size and grade of battery that is most suitable for the intended use.
□ Clean the battery contacts and also those of the device prior to battery installation.
□ Ensure the batteries are installed correctly with regard to polarity (+ and -).
□
Remove batteries from the equipment when it is not being used for an extended period of time.
□ Remove used batteries promptly.
WARNING :
cause severe injury or death within 2 hours. Seek medical attention immediately.
A---
Use to increase or decrease color brightness and to slow
down or accelerate speed.
C
B---
ON/OFF switch.
D
C---
R,G,B,W :
Choose color : red, green, blue or warm white.
E
D---
Flash key: 7 color jump change.
F
E---
Strobe key: Strobe color effect.
G
F---
Fade key: 7 color fade change.
G---
Smooth key: 3 color jump change.
5
D
The remote contains a CR2025 DC 3V button battery. If swallowed, it could
Open
Push
8