Connecting To The Power Supply - Commercial Electric 17898 Guía De Uso Y Cuidado

Installation (continued)
5
Installing the Infrared receiver
There are two options for you choose:
□
A: Remove the protective tape from the adhesive
back of infrared receiver, then place the infrared
receiver onto the position and press to insure
proper adhesion to the surface.
B: Use the two screws to install the infrared
receiver onto the position.
Note:
A
A: Sensor ef ciency distance ≤5 meters and sensor ef ciency angle about 60°.
B: The infrared receiver face to transmitter is correct.
6

Connecting to the power supply

Connect adaptor to power outlet
60°
3m 3m
5m
OFF ON
R G B
WW
Flash
Strobe
Fade
Smooth
Adaptor with plug
LED strip light
A
B
Connect the plug of adaptor to
infrared receiver controller
Infrared receiver controller
Infrared receiver
7
Please contact 1-877-527-0313 for further assistance.
B
+12V +12V
R R
G G
B B
W W
Correct
Incorrect
HOMEDEPOT.COM