Kobalt SGY-AIR211 Manual Del Usuario página 11

OPERATING INSTRUCTIONS
ATTACHING AIR LINE ACCESSORIES WITH GARAGE AIR LINE KIT:
NOTE: Always turn off the compressor and release any air within the system before changes,
modifications, or maintenance is performed to the air line system. Once the air in
the system has been released, remove the union connection (if used per manufactures
recommendations).
11. Connect the 3/8 in. NPT to the 1/4 in. NPT reducer bushing
(I) when connecting a 1/4 in. device to this system,
(See Figure 12).
12. For adding additional air tool accessories, (e.g. a filter
(not included)), use the 3/8 in. tube to 1/4 in. male thread
fitting and 3/8 in. tube to 1/4 in. female thread fitting.
(See Figure 13)
12
13
F
G
11
I
Air accessories
not included
kobalttools.com