Snapper NX Serie Instrucciones Originales página 17

Operating instructions – Lawnmower with IC engine
Problem
Grass is not being picked up or grass
catcher is not filling.
Wheel drive does not work.
Possible cause(s)
Grass too damp.
Ejector clogged.
Cutters blunt.
Insufficient power from motor.
Grass sack full.
Dirty grass sack.
V-belt torn or gears defect.
Cable pull/Bowden cable torn.
Remedy
Let the lawn dry.
Switch OFF engine, remove
hindrance.
Cutters must be replaced or
reground at a specialist garage.
Mow more often. Select a greater
cutting height.
Switch off engine.
Unload grass catcher.
Switch off engine. Clean air ducts
in the grass catcher.
Damaged parts must be replaced
at a specialist garage.
Damaged parts must be replaced
at a specialist garage.
English
13