Kohler PILLOW TALK POWER LITE K-3379 Instrucciones De Instalación página 5

C. SECURE TOILET
Assemble washers and nuts on exposed T-bolts.
CAUTION: Risk of personal injury or product
damage. Overtightening may cause breakage or
chipping.
Handtighten nuts, then tighten an additional 1/2 turn with
wrench.
D. ATTACH BOLT COVER
Slide plastic bolt cover (longer tab first) into the side of toilet.
Pull forward to hold in position.
E. CONNECT SUPPLIES
Remove coupling nut from accessory pack packed with
toilet. Carefully bend supply stop tubing to fit. Measure for
required penetration into supply stop. Cut and de-burr
tubing. Place connection hardware onto tubing as shown.
Hand-tighten coupling nut first and then the compression
nut.
Kohler Co., Kohler, WI U.S.A.
Longer Tab
Valve Shank
Washer
Tubing
Coupling Nut
5
Nut
Washer
Fig. #8
Fig. #9
Compression
Nut
Ferrule
Supply Stop
Fig. #10
BD
114252-2-