H. ADJUST THE WATER LEVEL
Adjust the tank water level to the proper marked waterline
by rotating the threaded rod clockwise to raise the water
level or counterclockwise to lower the water level as needed.
Carefully install the tank cover.
I. PLUG IN ELECTRICAL CORD
Plug the toilet electrical cord plug into a Class A
Ground-Fault Circuit-Interrupter (GFCI).
J. CHECK FOR PROPER OPERATION
The toilet has a dual flush operation, which allows for a 1.6
gallon (6L) flush and a 1.1 gallon (4.2L) flush.
Check that both flush functions are operating.
K. TROUBLESHOOT AS NECESSARY
To troubleshoot any problems that may occur, see the
owner's manual also packed with the product.
Kohler Co., Kohler, WI U.S.A.
Float
Waterline
Long Flush
(1.6 gpf (6 lpf))
Short Flush
(1.1 gpf (4.2 lpf))
7
Fig. #13
GFCI-Protected
Receptacle
Fig. #14
Fig. #15
BD
114252-2-