Selecting The Radiographic Technique - Sirona HELIODENT Vario Instrucciones De Uso

5 Operating
6
6
12

5.1.2Selecting the radiographic technique

Digital
You can switch back and forth between the conventional
and the digital radiographic technique by briefly holding
down the time selector (5).
The resulting reduction in the exposure time will then be
displayed.
If you are working with a digital radiographic system (e.g.
SIDEXIS), the Digital mode indicator lamp (6) on the
unit must be illuminated.
Use an X-ray field limitation for the digital radiographic
technique.
i
NOTE
The recommended exposure times apply to full-size
5
and universal SIDEXIS intraoral radiographic sen-
sors.
Other values apply when using radiographic sen-
sors from other manufacturers.
Conventional
If you want to take conventional (film) exposures, the
Digital mode indicator (6) must not be illuminated.
You can switch back and forth between the conventional
and digital radiographic technique by briefly holding
down the time selector (5). The Digital mode indicator
(6) then switches off.
The exposure time for conventional exposures is then
displayed.
5
Sirona Dental Systems GmbH
60 81 967 D 3350
D 3350201.02.08.02