Ego Power+ ST1200 Manual Del Usuario página 19

WARNING:
from the tool before servicing, cleaning, changing attachments or removing material
from the unit.
before each use check for damage/worn parts
check the bump head, guard and front-assist handle and replace the parts that are
cracked, warped, bent, or damaged in any away.
The line-cutting blade on the edge of the guard can dull over time. it is recommended
that you periodically sharpen it with a file or replace it with a new blade.
WARNING:
sharpening or replacing the blade. Take care of the blade on the guard and protect
your hand from cutting.
After each use, clean the trimmer.
WARNING:
from the tool before servicing, cleaning, changing attachments or removing material
from the unit.
◾ ◾
Use only mild soap and a damp cloth
to clean the tool. never let any liquid
get inside the tool; never immerse
any part of the tool into a liquid.
◾ ◾
Wipe off the unit with a clean, dry,
soft cloth.
◾ ◾
Keep air vents in the motor housing
and shaft free from debris at all
times (Fig. 11).
CAUTION:
vents will prevent the air from flowing
into the motor housing and result in
overheating or damaged of the motor.
WARNING:
when cleaning plastic parts. Most plastics are susceptible to damage from various
types of commercial solvents. Use clean cloths to remove dirt, dust, oil, grease, etc.
To prevent serious personal injury, remove the battery pack
Always wear gloves when mounting or replacing the guard, or
To prevent serious personal injury, remove the battery pack
Obstructions in the
never use water for cleaning your trimmer. Avoid using solvents
56V LiThiUM-iOn cORdLEss 12" sTRing TRiMMER
11
Air vents
in shaft
Air vents in
motor housing
19