Connect the Spout to the Controller
1) Connect the Spout connecting hose to the Controller
1. If the spout connection hose is too long, cut it to the appropriate length, making sure
the end is square.
2. Attach a hose clamp to the spout connecting hose.
3. Insert the hose onto the hot water outlet.
4. Secure the hose with a hose clamp.
*Please take care that the hose does not bend.
2) Connect the spout sensor connector
1. Remove the lid of the connection box. Connect the spout sensor connector to the
Controller connector.
• Insert firmly until the
connector clicks.
NOTE
• Please fix the connector
so that it does not become
tangled.
Sensor connector
Click
White
INSTALLATION PROCEDURE
Hose
clamp
White
16
Spout connecting hose
Hose clamp