Specifications - Toto REAH03B1U Manual De Instalación Y Del Propietario

Model number
Capacity
Rating
Power consumption
Type
Water supply connection
Output water temperature control
Water supply temperature
Guideline
for output
Water supply temperature
temperature
adjustment
Water supply temperature
range
Tank temperature
control
Heating temperature
Water supply temperature
41ºF→158ºF (5ºC→70ºC)
Water supply temperature
Heating time
59ºF→158ºF (15ºC→70ºC)
Water supply temperature
77ºF→158ºF (25ºC→70ºC)
Overheating prevention
Safety device
Flow rate
Duration
Product dimentions
Pruduct weight (emply)
Power plug
Power supply code
Sensor detection range (spout)
Ambient temperature
Use conditions
Water supply pressure

SPECIFICATIONS

Voltage
Frequency
41ºF (5ºC)
59ºF (15ºC)
77ºF (25ºC)
Heater
Sensor
device
Ground
Inlet temperature
Water condition
Humidity
REAH03B1U
0.7gallons (2.5L)
Open outlet
(
A solenoid valve is intalled just before the water supply
port of the tank. The spout side is open.
G1/2 compatible with 1/2 NPSM
Thermostatic mixing valve complies with ASSE 1070
77ºF(25ºC)~96ºF(36ºC)
82ºF(28ºC)~100ºF(38ºC)
88ºF(31ºC)~104ºF(40ºC)
Sheathed heater
158ºF (70ºC)
(131ºF(55ºC) in energy-save mode or Run out)
Manual reset thermostat switch / Thermal fuse
Power plug with ground
0.08gpc (0.32Lpc), Equipped with 0.5gpm (1.89L/min) flow control.
(
Integrated thermostatic mixing valve complies with ASSE 1070.
Minimum flow rate: 0.42gpm (1.6L/min)
On demand 10 seconds
width: 8-17/64" (210mm)
height: 11-45/64" (297mm)
depth: 5-15/64" (133mm)
(Excludes overhanging projections and bulges)
7.7lbs (3.5kg)
3-Prong with ground
27" (700mm)
5-1/8"~7-7/8" (130~200mm)
Sensor is self-adjusting.
39ºF(4ºC)~80ºF(27ºC)
34ºF(1ºC)~104ºF(40ºC)
Tap Water from municipal source only
(Not Reclaimed water & Well water)
Minimum required: 15psi (100kPa)(Flowing)
Maximum allowed: 80psi (551kPa)
Max.90% RH
7
AC120V
60Hz
0.6kw
Thermistor
18 minutes
15 minutes
13 minutes
)
)