Electrical Safety - Jacuzzi J-300 Serie Ficha Técnica De Preinstalación

Ocultar thumbs Ver también para J-300 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 25

Electrical safety

The Jacuzzi® spas are safe products, manufactured in com EN
60335.2.60, EN 61000, EN 55014 and tested during production
to ensure user safety.
Installation must be carried out by qualified and authorized
personnel, in compliance with current national provisions.
It is the responsibility of the installer to select mate-
rials based on their intended use, to carry out work
properly, to check the condition of the system that
the unit will be connected to and that it ensures safe-
ty of use also concerning maintenance work and the
possibility to examine the system.
The Jacuzzi® spas are class "I" appliances and therefore they
must be permanently connected, without any intermediate
connections, to the electrical system and to the protection sys-
tem (earth system).
The electrical system of the building must be pro-
vided with a 0.03A differential switch and with an
efficient protection (earth) circuit.
Check for proper operation of the differential switch
by pressing the TEST button, which should trip.
Parts incorporating electrical components, except
remote control devices, must be located or fixed so
that they cannot fall into the spa.
Live components and equipment must be out of
reach of individuals in the spa.
If the building's electrical system is not able to guar-
antee a stabile power supply, it is recommended to
install a voltage stabiliser that suitably dimensioned
for the required power upstream of the equipment.
For connection to the power supply network, we recommend
installing an isolating multi-pole switch, which will ensure com-
plete disconnection in the event of a category III overvoltage;
these devices must be positioned in an area that complies with
the safety regulations.
The installation of electrical devices and equipment (sockets,
switches, etc.) near the spa must be in compliance with legal
standards and regulations in the country where the spa is in-
stalled.
For the equipotential connection as required by specific na-
tional standards, the installer must use the terminal provid-
ed (standard EN 60335.2.60)in the electrical box (
marked with the symbol
In particular, an equipotential condition must be established for
all metallic masses surrounding the spa, for example water and
gas pipes, metallic platforms, and so on.
The appliance comes equipped with an LED lighting system, in
compliance with Regulation EN 62471.
CAUTION! Before carrying out any maintenance opera-
tion, disconnect the appliance from the power supply line
.
12), and
18

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

J-315J-325J-335J-345J-355J-365 ... Mostrar todo

Tabla de contenido