Victron energy Orion-Tr Smart 12/12-18 Manual página 20

Specifications - continuation
Orion-Tr Smart Charger
Isolated 360 – 400 Watt
Input voltage range (1)
Under voltage shut down
Under voltage restart
Nominal output voltage
Output voltage adjust range
Output voltage tolerance
Output noise
Cont. output current at nominal
output voltage and 40°C
Maximum output current (10 s)
at nominal output voltage
Short circuit output current
Cont. output power at 25°C
Cont. output power at 40°C
Efficiency
No load input current
Standby current
Galvanic isolation
Operating temperature range
Humidity
DC connection
Maximum cable cross-section
Weight
Dimensions hxwxd
Standards: Safety
Emission
Immunity
Automotive Directive
1) If set to nominal or lower than nominal, the output voltage will remain stable within the specified
input voltage range (buck-boost function).
If the output voltage is set higher than nominal by a certain percentage, the minimum input
voltage at which the output voltage remains stable (does not decrease) increases by the same
percentage.
Note 1) The VictronConnect App will not display current in or current out.
Note 2) The Orion-Tr Smart DC-DC Charger Isolated is not equipped with a VE.Direct port.
18
24/12-30
(360W)
20-35V
14V
15V
12,2V
10-15V
+/- 0,2V
2mV rms
30A
45A
60A
430W
360W
88%
< 100mA
Less than 1mA
200V dc between input, output and case
-20 to +55°C (derate 3% per °C above 40°C)
Max. 95% non-condensing
Screw terminals
16mm² AWG6
12V input and/or 12V output models: 1,8 kg (3 lb)
Other models: 1,6 kg (3.5 lb)
12V input and/or 12V output models:
130 x 186 x 80 mm (5.1 x 7.3 x 3.2 inch)
Other models: 130 x 186 x 70 mm
(5.1 x 7.3 x 2.8 inch)
EN 60950
EN 61000-6-3, EN 55014-1
EN 61000-6-2, EN 61000-6-1, EN 55014-2
ECE R10-5
24/24-17
(400W)
20-35V
14V
15V
24,2V
20-30V
17A
25A
40A
480W
400W
89%
< 80mA