Glossary
Radio - Press this button to play
the radio instead of an alarm
tone. Hold for 3 seconds to scan
available FM channels.
Alarm tone - Press this button to
choose an alarm tone, using (+)
and (-) to adjust. Press again to
confirm.
Lower volume - Press to decrease
volume.
Snooze - Press to momentarily
stop alarm sound and light for five
minutes. After that time, the alarm
tone will resume playing and the
light will gradually increase to
maximum intensity for 2 minutes.
Raise volume - Press to increase
volume.
Display brightness - Press this
button to choose between three
different LED display intensities:
low, high, and off. Note: The
clock will automatically display
the brightest intensity during
programming, but will resume
to the chosen option after 5
seconds.
Light - Press once to turn on the
light, using (+) and (-) to adjust
between 10 levels of brightness.
Press a second time to switch on
light colors, using (+) and (-) to
choose between 6 colors: green,
red, blue, purple, orange, and
indigo.
LED display - This screen displays
the time and modes you have
selected.
AM Icon - This indicates AM time
when displayed.
PM Icon - This indicates PM time
when displayed.
Alarm display Icon - This indicates
you have programmed an alarm
when displayed.
Sleep Timer Icon - This indicates
you have set a sleep timer when
displayed.
Select down - Touch to maneuver
between sound or light options.
Select up - Touch to maneuver
between sound or light options.
Alarm option - Touch to turn on
alarm mode. The existing alarm
time will display for 2 seconds. To
adjust the alarm time, hold for 3
seconds then use (+) and (-) to
adjust. First adjust the hour, press
again to adjust the minute, and
one last time to confirm.
Current Time - This button is used
to set the time. Press it once to
switch between a 12-hour and 24-
hour clock, or hold for 3 seconds
until the hour time begins to blink,
then use the (+) and (-) to adjust
the hour. Press the button again to
confirm the change and move to
the minutes, which you can also
adjust with the (+) and (-). Press
one final time to set the time.
Sleep Timer - Touch this button
to initiate sleep timer. Touch the
sleep timer button once to set at
15 minutes. Each press will add
15 minutes to the timer. Light will
gradually dim until it turns off over
the course of set time. Press twice
for 30 minutes, three times for 60
minutes, and four times to turn off.
Leave for 5 seconds to confirm.