Faqs; Troubleshooting - Home HME040078N Manual Del Usuario

Using Your Alarm Clock
Adjust Volume
1. Select the lower volume button to
the lower the volume.
2. Select raise volume button to raise
the volume.
Dismiss Alarm
Press any button except for snooze to
stop alarm tone completely.

FAQs

Where should I place my alarm clock?
Place the alarm 40cm to 50cm from
your head, such as on a bedside table.
How long does the snooze button last?
The snooze button momentarily stops
the alarm for five minutes. Both sound
and light will resume after this time.
Why does the clock need a battery?
The battery serves as a backup power
source should a power failure occur. To
ensure that the battery is functioning,
please change regularly.

Troubleshooting

PROBLEM
Buttons are not
responding when
I press them.
Time display
is blinking.
POSSIBLE CAUSES
Not touching or pressing
one button at a time,
waiting at least one
second between presses.
The (:) symbol on your
LED display should blink
continually. This is normal
and ensures your clock
is functioning. If the
numbers are blinking, you
can adjust the time using
(+) or (-).
Program the Radio
1. Hold the radio button for 3 seconds
to scan available FM channels.
These will be automatically saved.
2. Press radio button once to play
radio.
3. Use (+) and (-) to select an FM
station.
Can I use a colored light during sunrise
or sleep timer?
No, these options use white light only
in order to simulate natural light. To
use the colored light options, press the
light button twice and use (+) and (-) to
select your color.
No sound for alarm clock even though
the radio works fine?
In standby mode, increase the alarm
clock volume with the raise volume
button (You must not be in "Tone",
"Light", "Radio", or any other mode.)
Unplug your alarm clock for
at least 3 seconds before
reconnecting to power.
Touch the current time
button to return to the
current time.
You can also turn off the
LED display completely by
pressing the digital display
brightness button.
SOLUTIONS