Sensor Data Transmission; Clock; Clock Reception; Manually Set Clock - Oregon Scientific RMR202 Manual Del Usuario

NOTE Use alkaline batteries for longer usage and
consumer grade lithium batteries in temperatures below
freezing.

SENSOR DATA TRANSMISSION

To search for a sensor:
Press and hold + MODE.
The sensor reception icon in the remote sensor area
shows the status:
ICON
TIP The transmission range may vary depending on
many factors. You may need to experiment with various
locations to get the best results.

CLOCK

CLOCK RECEPTION

This product is designed to synchronize its clock
automatically with a clock signal.
DESCRIPTION
Main unit is searching for
sensor(s).
A channel has been found.
The sensor cannot be
found.
RMR202:
Slide EU / UK to select the signal received.
• EU: DCF-77 signal: within 1500 km (932 miles) of
Frankfurt, Germany.
• UK: MSF-60 signal: within 1500 km (932 miles) of
Anthorn, England.
RMR202A:
• WWVB-60 signal: within 3200km (2000 miles) of
Fort Collins Colorado.
To enable / disable signal reception:
Press and hold to enable or
reception.
NOTE Reception takes 2-10 minutes. If the signal is
weak, it can take up to 24 hours to get a valid signal.
If signal reception is unsuccessful, place your unit next
to a window, press and hold
search.
Clock signal reception indicator:
STRONG
SIGNAL

MANUALLY SET CLOCK

To set the clock manually, disable the signal reception first.
1. Press and hold MODE.
2. Press or to change the settings.
3. Press MODE to confirm.
4. The settings order is: time zone, 12/24 hr format,
4
to disable signal
to force another signal
WEAK
NO SIGNAL
SIGNAL