Nuna Bugaboo turtle Manual Del Usuario página 15

vehicle seat from being torn. They can also guide the
ISOFIX connectors.
3
Rotate the ISOFIX connectors 180 degrees until they
are pointing in the direction of the ISOFIX guides. (9)
4
Line up the ISOFIX connectors with the ISOFIX guides,
and then click both ISOFIX connectors into the ISOFIX
anchor points. (10)
Make sure that both ISOFIX connectors are securely
attached to their ISOFIX anchor points. There should
be two audible clicks and the colors of the indicators
on the both ISOFIX connectors should be completely
green.
(10) -1
Check to make sure the base is securely installed by
pulling on the both ISOFIX connectors.
5
After placing the base on the vehicle seat, extend the
load leg to fl oor (11). When the load leg indicator shows
green means it is installed correctly, red means it is
installed incorrectly. (11)
The load leg has 24 positions. When the load leg
indicator shows red this means the load leg is in the
wrong position.
Make sure the load leg is secure by pressing down on
he front of the base.
To shorten the load leg, squeeze the load leg release
button and pull the load leg upwards. (11)-1
The completely assembled base is shown as (12)
The ISOFIX connectors must be attached and locked
onto the ISOFIX anchor points. (12)-1
The load leg must be installed correctly with green
indicator. (12)-2
6
To remove the base, press the secondary lock button
(13)-1 fi rst and then the button (13)-2 on the latch
190104_bugaboo_turtle_user_guide_EU_Part1_P1-295.indd 15 190104_bugaboo_turtle_user_guide_EU_Part1_P1-295.indd 15
15
04-03-19 09:42 04-03-19 09:42