Vehicle Customization - Axxess GMOS-LAN-07 Instrucciones De Instalación

Installation instructions for part GMOS-LAN-07
Vehicle customization with the
optional AX-LCD
For the following vehicles only, the AX-LCD allows the retention of the vehicles personalization menu
that is lost after removing the factory radio.
Chevrolet Malibu (with single color, monochrome screen) 2013-2015
Chevrolet Malibu Limited (with single color, monochrome screen) 2016
Chevrolet Trax 2015-2016
From the DIN harness with leads on the AX-LCD harness:
• Connect the Black wire to ground.
• Connect the Red wire to accessory power.
• Connect the Pink wire to the Pink wire of the GMOS-LAN-07 harness.
Note: This wire will have to be soldered onto the GMOS-LAN-07.
• Tape off and disregard the Blue/Pink wire, it will not be used in this application.
• Press and hold the "Return/ESC" button on the LCD screen for 5 seconds until
"Select Interface" comes up.
• Select "Connection Type", and then press "Enter"
• Scroll up or down to "Gateway", and then press "Enter"
• Once done, press the "Return/ESC" button two times to get back to the main menu.
Axxess Integrate
(sold separately)
axxessinterfaces.com
IMPORTANT
If you are having difficulties with the
installation of this product, please call our
Tech Support line at 1-800-253-TECH.
Before doing so, look over the instructions a
second time, and make sure the installation
was performed exactly as the instructions
are stated. Please have the vehicle apart
and ready to perform troubleshooting steps
before calling.
•
metraonline.com
K P
®
NOWLEDGE IS OWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recommends MECP
certified technicians
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION