Publicidad
R
R
Fig. 8
8. Slide the Top (Ea) over the sides and vertical dividers aligning the eight Rafix Bolts (R) with the
eight Rafix Cams (Q). See Figure 8. Tighten the cams.
S x 3
Fig. 9
9. Place the Foot (Fa) on top of the Cleat (G) so that the flat non-curved edges are flush.
Place the Cleat (G) under the Foot (Fa) so that one end of the Cleat (G) is aligned with
one of the Wood Dowels (U). See Figure 9. Use three #8 x 2-1/2" Screws (S) to attach the
Foot (Fa) to the Cleat (G).
R
Ea
R
R
Q
R
Q
S
S
Fa
G
Align end of cleat
with wood dowel
R
Q
R
Q
S
Q
x 8
06/11 — 747Wa — Page 7
Publicidad
