Fellowes Orion 500 Manual De Instrucciones página 5

BEFORE YOU BIND
1
Select the correct comb diameter
using the document measure.
5
Insert the plastic comb into the
opening mechanism. Pull comb-
opening lever forward to open
the comb.
BINDING A DOCUMENT
1
Punch front and back covers
first.
5
2
Select the correct punch
profile for the sheet size.
Select releasable dies as
appropriate.
6
Test punch scrap sheets to check
edge guide setting.
2
Front
MAX 30
Cover
(80gsm)
Back
Cover
Punch sheets in small batches
that do not overload the
machine or the user.
3
To cancel a punch, pull the pin
forward. Test punch a sheet.
7
Load punched sheets directly
onto the open comb.
3 3
Load punched sheets directly
onto the opened comb. Starting
with the front of the document.
4
Select the correct back margin
depth for the number of sheets.
8
Empty waste tray regularly -
ideally after each use.
4
When all punched sheets are
loaded onto the comb, push
the comb lever backwards to
close the comb and remove the
bound document.