Intended Use; Product Specific Instructions - Atlas Copco P2531-R Manual De Usuario

Safety Information
WARNING Read all safety warnings, instructions, il-
lustrations and specifications provided with this
power tool.
Failure to follow all instructions listed below may result
in electric shock, fire, property damage and/or serious
injury.
Save all warnings and instructions for future refer-
ence.
WARNING All locally legislated safety rules regard-
ing installation, operation and maintenance shall be
respected at all times.
Statement of Use
• For professional use only.
• This tool and its accessories must not be modified in any
way.
• Do not use this tool if it has been damaged.
• If the tool data or hazard warning signs on the tool cease
to be legible or become detached, replace without delay.
• The product must only be installed, operated and ser-
viced by qualified personnel in an industrial environ-
ment.

Intended Use

This product is designed for chipping, riveting, scaling, or
ramming, according to its operating instructions. No other
use permitted.

Product Specific Instructions

Personal protection equipment
Personal safety
• Use personal protective equipment. Always wear eye
and ear protection. Protective equipment such as
gloves, dust mask, steel toe-capped shoes and hard hat
will reduce the risk of personal injuries.
• Dress properly. Do not wear loose clothing or jew-
elry. Keep your hair and clothing away from moving
parts. Loose clothes, jewelry or long hair can be caught
in moving parts.
Check the tool before starting work
4 © Atlas Copco Industrial Technique AB - 9836 3987 00
• Always use a retainer.
• Inspect the retainer for wear and damage regularly.
• The tool and its accessories must not be modified in any
way.
• The trigger must never be removed or fixed by tape for
example.
• If the trigger is not working properly, make sure that it is
replaced.
• The air supply coupling should be separated from the
tool by a whip hose.
Installation of Vibrating Tools
We recommend using a minimum length of 300 mm (12") of
flexible hose for compressed air between a vibrating tool and
the quick-action coupling.
During work
• Disconnect the tool from the air supply before changing
accessories, chisel or die.
• Stop using the tool if abnormally loud noises or vibra-
tions occur during use.
• Be aware that the chisel may break during operation.
• Never trigger a hammer unless held against the work
piece.
• Use vibration dampened tools if available.
• Reduce the total time of exposure to vibrations, espe-
cially if the chisel has to be guided by hand.
Working area
• Ensure that the area in which you are working is kept
free from other people so that no one can get injured.
• People nearby must also wear hearing and eye protec-
tion.
• Check that there is good ventilation and dust extraction
from the premises.
P2531-R