Modes Of Use; Replacement Parts - TEUFELBERGER treeMOTION Instrucciones De Uso

Limitations oF Use

3. MODES OF USE

There must not be any chance of a free fall. „Free
fall" does, however, not mean e.g. slipping of the
user´s feet.
Choose the connection of the harness to an an-
chorage point at a level which will result in the least
total fall distance consistent with the user's ability
to carry out work tasks.
When making any connection to a point on a harness
which cannot be seen by the wearer of the harness,
either make it before putting the harness on, have it
made or checked for security by a second person.
Use as Work Positioning Belt on the basis of
EN 358
Lateral loading of the harness:
Feet should be well supported (e.g. Standing on pole
with spikes). Work positioning lanyard on a level
with waistline when connected to both standing D
rings (4). (pic. 10)
For treeMOTION only (not for treeMOTION S.light):
This is NO attachment point to AS/NZS 1891.1:2007
section 6.2.2 (b). Use as a restraint system on working
platforms. (The user must not reach a point where
a free fall is possible.) Attach the work positioning
lanyard to the central rear attachment ring (15). The
anchor point must be above waistline level. (pic. 11)
pic. 10
10
pic. 9
pic. 11
Use as Sit Harness on the basis of EN 813:
– Suspended – central attachment on rope bridge (10).
Doubled (running) rope system with friction hitch
adjuster.
– Suspended – central attachment on rope bridge (10).
Single rope descent with
– Suspended – Attachment to both front D rings (8).
Doubled (running) rope system with friction hitch
adjuster.
pic. 12
pic. 14

4. REPLACEMENT PARTS

Product specific instructions are included with every
replacement part.
– Upper Assembly treeMOTION 7333211
– Replacement Rope Bridge 7333212
– Hip-Front D Replacement Kit 7333208
– Leg Loops (right: 7333206 / left: 7333207)
– Replacement Leg Padding (1 pair) 7333209
– Comfort Back Padding 7359960
– Gear Loops for treeMOTION 7333213
– Standard Back Padding 7333214
Shoulder straps and load bearing assembly
(Part no. 7333211)
Upper harness (shoulder straps and load carrying
assembly) are non-PPE elements and not intended
mechanical adjuster.
pic. 13