Installing Handle; Removing Handle; Installing Tool Holder - RIDGID WD1851 Manual Del Operador

SP6673-1 ES 0108.qxd 1/24/08
Drum/Caddy Assembly (continued)

Installing Handle

Press and hold release buttons while
installing handle into handle receptacles
in drum (See illustration).
NOTE: An audible snap of release
buttons indicates successful engagement
of handle.

Removing Handle

Press and hold release buttons as
shown. While firmly pushing in release
buttons, pull handle upwards to remove
(see illustration).

Installing Tool Holder

1. Install tool holder as shown with
extension wand holders facing unit.
2. As an alternative storage solution, the
tool holder may hang on a wall. Two
wall mounting hooks (not provided)
must be secured to the wall as shown
(sold separately).
1:52 PM Page 8
Tote Snaps
8
Tote
Straps (4)
Handle
Extension
Wand
Storage
Locations
Grommet
Wall Mount
Hook
Wall