General Instructions - BRASS AKRON FIREFOX 3463 Instrucciones De Instalación, Funcionamiento Y Mantenimiento

WARNING: The FireFox monitor contains moving parts. Keep hand, finger and objects away from pinch points.
!
WARNING: Not designed for explosive environments .
!
WARNING: Exceeding the maximum pressure and flow of the monitor or nozzle may cause damage.
!
WARNING: Do not disconnect monitor from quick disconnect base while flowing.
!

GENERAL INSTRUCTIONS

• Review the instructions, wiring diagram, component layout and rotational stops diagram before installing this
unit . This unit operates on 12 or 24 volt DC depending on the unit chosen . All electrical current flows through the
wires . The monitor does not act as a ground . The wires from the control boxes can be cut to the length for the
application plus 10 inches (See STEP 2). Do not extend the wires from the logic box to the monitor.
Figure 1
8-1/32
8-17/32 (500 GPM VERSION)
8-33/64
9-1/32 (500 GPM VERSION)
• Not recommended for use in salt water applications.
• For firefighting by trained firefighters only.
• For use with water or standard fire fighting foams only. After use with foam, flush with fresh water.
• Do not use the FireFox nozzle as a forcible entry tool.
• Drain the FireFox monitor and nozzle after use to prevent "freeze damage".
• Ensure that the thread in the nozzle swivel matches the thread on the FireFox outlet. Do not overtighten the
nozzle onto the FireFox .
• The FireFox monitor, nozzle, logic box, control boxes and field adjustable rotation stops are made for optimal
performance, Do not alter in any manner.
• Do not install shutoffs on the outlet of the FireFox.
• Mount the logic box, control boxes out of Danger Zone (Figure 4).
3-31/64
Top View
8-53/64
9-17/64 (500 GPM VERSION)
2-9/32
3-1/2
1-1/2 NPT
SCALE 0.750
20-11/16
2
DIMENSIONAL LAYOUT
11-49/64
9-27/64
Side View
16-1/16
2 NPT