Mounting Instructions And Dimensions - DART Controls 730 BLMC Serie Manual Del Usuario

Mounting Instructions and Dimensions

1. Four 3/16" wide slots are provided for control mounting (See dimension diagram).
2. Four 0.280" holes are provided on the motor mounting plate (See dimension diagram).
3. Use standard hardware to mount.
Do not mount where ambient temperature is outside range of -10
4X #8-32UNC-2B
EQUALLY SPACED
NOTE 1
2.000
2.000
0.140
4x 0.280
3.500
4.250
Note: If using Face Mounting Technique, the mounting bolt depth should not exceed 7/16"
from end bell face.
4
2
0
7.150 6.410
2.880 1.380
1.440
0.375

0.3745
Caution:
5.530
6
CONTROLS
8 ON
OFF
10
5.125 TYP.
1.520
0.190
BOTH
ENDS
NAMEPLATE
1.250 2.000
2.750
3
C (15 F) to 40 C (104
o o o
7/32" TYP.
(4 SLOTS)
.350 DEEP
5.500
.825
MOTOR RECEPTACLE
ABLE TO BE ROTATED 180°
6.070
F).
o
1.550