Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Product Safety Information
Intended Use:
These riveters are designed for all pop riveting applications.
For additional information refer to Product Safety Information Manual Form 16576555.
Manuals can be downloaded from www.ingersollrandproducts.com.
Product Specifications
Stroke
length
Models
inches (mm)
127
9/16 (14) up to 3/16 (5) 1940 (8630)
LA437
5/8 (16) up to 3/16 (5) 1940 (8630)
LA437-EU 5/8 (16) up to 3/16 (5) 1940 (8630)
LA415
5/8 (16) up to 1/4 (6) 1940 (8630)
LA415-EU 5/8 (16) up to 1/4 (6) 1940 (8630)
† K
= 3dB measurement uncertainty
pA
‡ K
= 3dB measurement uncertainty
wA
Installation and Lubrication
Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install a
properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any hose
coupling without internal shut-off, to prevent hose whipping if a hose fails or coupling discon-
nects. See drawing 16591620 and table on page 2. Maintenance frequency is shown in a circular
arrow and defined as h=hours, d=days, and m=months of actual use. Items identified as:
1. Air filter
2. Regulator
3. Lubricator
4. Emergency shut-off valve
5. Hose diameter
6. Thread size
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.
03539772_ed8
Rivet
Traction
Capacity
Power
lbs (N)
Sound Level dB(A)
(ISO15744)
† Pressure (L
) ‡ Power (L
p
89.0
100.0
89.0
100.0
91.0
102.0
86.8
97.8
86.8
97.8
* K = Measurement uncertainty Vibration
7.
Coupling
8.
Safety Air Fuse
9.
Oil
10. Hydraulic Fluid -Automatic Transmission
Fluid, Type A
EN
Vibration (m/s²)
(ISO28927)
) Level
*K
w
3.2
0.7
3.2
0.7
3.2
0.7
< 2.5
---
< 2.5
---
EN-1
Publicidad
Tabla de contenido
