Deleting All Cid R; Remote Access; Cordless Handset; Answering Systemi - GE THOMSON 21098 Guía De Uso

6. Press SELECT again to confirm deletion. DELETED shows on the display.
NOTE: Press the *EXIT key to return to the standby mode.
Deleting All CID Records
1. Make sure the phone is OFF (not in talk mode).
2. Press the MENU button to access the option menu.
3. Use the touch-tone pad or the  or  buttons to select 4 DELETE ALL.
4. Press the SELECT to confirm. DELETE ALL? shows on the display.
5. Press SELECT again to confirm deletion. The display shows DELETED
followed by NO CALLS.
NOTE: Press the *EXIT key on the handset to return to the standby mode.

Remote Access

You may access the answering system with the cordless handset or from
any tone-dial compatible telephone.

Cordless Handset

Use the corresponding handset keys just like you would use the base
buttons (see "Answering System Setup"). The button functions are located
on the handset above each number key. For example, to play messages:
• Press the MENU button and use the  or  buttons to scroll to
ANSWERER. Press the SELECT button and use  or  to select 1
REMOTE ACCESS. Then press SELECT to confirm. ANSWERER REMOTE
ACCESS shows on the display.
• Press 2 (play/stop) followed by the mailbox number to play the message
in that mailbox. For example, press 2 and 3 to play the message in
mailbox 3.
• When you are finished listening to your messages, press the *exit button
again.
Answering System Indicator
The answering system is active when the indicator on the base is on.
56