MBM CPG77T Manual De Uso E Instalación página 47

OPERATION
Cleaning appliance
Cleaning parts in contact
Cleaning at commissioning
Checking thermostat
Greasing the gas taps
Checking / Replacing gas
TROUBLESHOOTING
Whenever the appliance does not work properly, try to solve the less se-
rious problems using this table.
FAULT
The appliance
does not turn on.
The light indicators, if
present, do not turn on.
Water does not reach
the pasta cooker tank.
Water does not drain
from the cooking com-
partment.
The inner walls of the
tank are covered with
limestone.
The cooking compart-
ment is stained.
The gas appliance does
not turn on.
If the problem cannot be resolved, turn the appliance off, disconnect it
from the electrical mains and shut all the supply valves. Then contact au-
thorized customer service
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
with foodstuff
Cleaning flue
supply pipes
POSSIBLE CAUSE
- The master switch is
not connected.
- The residual current
device or circuit breaker
has tripped.
The waterworks gate
•
valve is shut.
The drain is clogged.
•
The water is too hard;
•
the softener is fini-
shed.
Quality of the water.
•
Ineffective detergent.
•
Insufficient rinsing.
•
Gas valve shut.
•
Air inside pipes.
•
- 21 -
MAINTENANCE
FREQUENCY
Daily
Daily
Upon arrival after installation
Yearly
In case of need - Yearly
In case of need
In case of need
INTERVENTION
Connect the master
•
switch.
Restore the residual
•
current device or cir-
cuit breaker.
Open the waterworks
•
gate valve.
Clean the drain filter.
•
Free the drain from
•
residues.
Connect the appliance
•
to a water softener.
Regenerate the water
•
softener.
Descale the cooking
•
compartment.
Filter the water (see
•
water softener).
Use the recommend-
•
ed detergent.
Rinse once again.
•
Open the gas valve.
•
Repeat the ignition op-
•
erations.
9.
EN