urmet domus BiBus II ED. 1072/80 Manual De Instrucciones página 5

ENGLISH
PERFORMANCE............................................................................................................................................ 9
STRUCTURE ................................................................................................................................................. 9
TECHNICAL SPECIFICATIONS .................................................................................................................... 9
OPERATION IN 2ND EDITION SYSTEMS.................................................................................................... 9
OPERATION IN 1ST EDITION SYSTEMS .................................................................................................... 9
INSTALLATION ............................................................................................................................................ 10
PROGRAMMING.......................................................................................................................................... 10
Operating mode ........................................................................................................................................ 10
Relay energising time ............................................................................................................................... 11
Enabling/disabling switchboard function buttons ...................................................................................... 11
Programming special decoder control from door phones and calling stations ......................................... 11
Programming door phone staircase light button user codes and calling station IDs ................................ 11
1ST EDITION SYSTEM PROGRAMMING EXAMPLES .............................................................................. 12
8
PERFORMANCE
The decoder 1072/80 can be used in digital BiBus 1st
and 2nd edition systems to activated or deactivate
electrical loads by means of a double exchange
relay whose operation can be:
• bistable;
• toggle timed (from 1 to 999s).
Possible applications include: switching staircase lights
on, operating supplementary locks, opening gates,
etc. The load can be controlled directly, since this is a
power relay (see TECHNICAL SPECIFICATIONS).
The special decoder is programmed by means of
keyboard 1032/65 and adapter 1072/60.
STRUCTURE
The special decoder consists of the following parts:
1
2
3
4
1. White shock-proof plastic cover
2. Memo label
3. Fixed relay output terminal boards
4. Terminal protection cover
5. Bus connection terminal board: L1, L2
6. Programming adapter connector 1072/60
DS1072-019 DS1072-019
TECHNICAL SPECIFICATIONS
L1, L2 consumption:
Working temperature range:
Toggle relay time:
Timing precision:
Relay contacts:
OPERATION IN 2ND EDITION SYSTEMS
The following features are offered by use in a BiBus
2nd edition system:
• possibility of controlling the special decoder via
a switchboard with four function buttons F1, F2,
F3, F4 (each of which can be deactivated on the
special decoder);
• possibility of controlling the special decoder via the
"staircase lights" of the door phones as follows:
1) via door phones programmed in special
decoder only (up to four);
2) via all door phones in certain system columns
(up to four columns);
3) via all door phones in the system;
4) via door unit with digitiser (with the exception
of 1072/18 and 1072/19) using a programmed
button.
Extra operating combinations in addition to the
four listed above can be obtained according to
how the special decoder is programmed (see
PROGRAMMING).
• Bistable or toggle timed operation (from 1 to
6
999s); toggle: the relay is operated for the
programmed time; bistable: the relay is switched
5
on by the door phones and calling stations either
by switchboard button F1 or F2 and is switched
off either by switchboard button F3 or F4.
OPERATION IN 1ST EDITION SYSTEMS
The following features are offered by use in a BiBus
2nd edition system:
• Possibility of controlling the special decoder via
a switchboard with three function buttons F2, F3,
F4 (each of which can be deactivated on the
special decoder).
• Possibility of controlling the special decoder via
the "staircase lights" of the door phones.
• Bistable or toggle timed operation (from 1 to
999s); toggle: the relay is operated for the set
time; bistable: the relay is switched by the door
phones and calling stations either by switchboard
button F1 or F2 and is deactivated either by
switchboard button F3 or F4.
1mA
-5°C to ÷ +45°C
1s ÷ 999s
in 1 s steps
±2%
30Vdc 5A
250Vac 5Aac.
9