Location; Wiring; Final Adjustements - golmar SV-220S Manual De Instalación

DOOR PANEL INSTALLATION
D
oor panel wiring.
Connect the installation wires to the terminal connector,
according to the installation diagrams.
Face the door panel to the wall by placing the top at 1,65m.
height and insert the installation wires through the cables
entry.
.
Drill two holes of 6mm. diameter and insert the wallplugs.
Fix the door panel with especified screws.
If after starting the system it´s considered that the
audio volume isn t correct, proceed with the
necessary adjustments as shown on the picture.
.
The telecamera has a pan and tilt mechanism.
If the orientation is not adequate the correct
its position.
P
lace the door panel.
F
inal adjustments.
'
37