Blade Maintenance - Makita DUM111 Manual De Instrucciones

Blade maintenance

Before the operation or once per hour during operation, apply low-vis-
cosity oil (machine oil, or spray-type lubricating oil) to the blades.
After operation, remove dust from both sides of the blades with
a wired brush, wipe it off with a cloth and then apply low-viscos-
ity oil (machine oil, or spray-type lubricating oil) to the blades.
NOTICE:
Do not wash the blades in water. Doing
so may cause rust or damage to the tool.
NOTICE:
Dirt and corrosion cause excessive
blade friction and shorten the operating time per
battery charge.
Storage
The hook hole in the tool bottom is convenient for hang-
ing the tool from a nail or screw on the wall.
Attach the blade cover to the shear blades so that the
blades are not exposed. Store the tool out of the reach
of children. Store the tool in a place not exposed to
moisture or rain.
► 1 . Hole
► 1 . Hole
19 ENGLISH
1
1