Safety-Related Information; Conventions Used In This Document; Product Overview; Feature Description - Dräger HPS 3500 Instrucciones De Uso

1

Safety-related information

Before using this product, carefully read these Instructions

for Use and those of the associated products.
Strictly follow the Instructions for Use. The user must fully

understand and strictly observe the instructions. Use the
product only for the purposes specified in the Intended use
section of this document.
Do not dispose of the Instructions for Use. Ensure that they

are retained and appropriately used by the product user.
Comply with all local and national rules and regulations

associated with this product.
Only trained and competent personnel are permitted to

inspect, repair and
recommends a Dräger service contract for all maintenance
activities and that all repairs are carried out by Dräger.
Only authentic Dräger spare parts and

accessories may be used for maintenance. Otherwise the
proper functioning of the product may be impaired.
Do not use a faulty or incomplete product. Do not modify

the product. The product must not be fitted with third-party
components.
Notify Dräger in the event of any product or component

fault or failure.
Incorrect or third-party inner fittings, the drilling of new

holes for accessories or other modifications to the helmet
may adversely affect the protective function and invalidate
any approval.
When fitted with another item of personal protective
equipment or with an accessory other than as supplied by
the helmet manufacturer for use with this helmet, a helmet
marked as complying with this European standard might no
longer satisfy all clauses of this European standard.
This helmet complies with the requirements of the

European standards when the chin strap supplied by the
helmet manufacturer is worn and adjusted in accordance
with these instructions.
The HPS 3500 helmet, for use in water according to the

requirements of EN 1385:2012, must be used with the
retention system without the chin cup.
2 Conventions used in this
document
Definition of alert icons
The following alert icons are used in this document to provide
and highlight areas of the associated warning text that require
greater awareness from the user. The meanings of the alert
icons are defined as follows:
WARNING
!
Indicates a potentially hazardous situation.
If not avoided, it could result in death or serious injury.
CAUTION
!
Indicates a potentially hazardous situation. If not
avoided, it could result in physical injury, or damage to
the product or environment. It may also be used to
alert against unsafe practices.
Dräger HPS 3500
service the product.
3 Description
3.1

Product overview

3
2
Dräger
1
16
15
1 Adjustment band
2 Retention straps
3 Helmet shell
4 Ventilation system
5 Front lamp interface (only with Extend version)
6 Front comfort piece
7 Suspension mesh
8 Rear comfort piece
9 Harness
10 Quick-release buckle
11 Chin cup
12 Front lamp (optional)
13 Goggle (optional)
14 Neck guard (optional)
15 Side lamp (optional)
16 Mesh visor (optional)
17 Size adjustment wheel
3.2

Feature description

The helmet is continuously adjustable for head sizes from 52
to 64 cm with optional padding from 50 to 64 cm. It features a
ventilation system that prevents ingress of sparks, cuttings, or
other particles. The ventilation openings can be sealed
completely during an operation.
Safety-related information
17
4
5
6
7
8
9
10
11
12
13
14
03331261
7