PALSON 30595 Modo De Empleo página 13

The virtual wall unit (1) uses two batteries (LR20) to divide the infrared emission distance into three
options, as shown in the following diagram:
Over 7 metres
3-7 metres
0-3 metros
Select one of these options according to what you want to clean.
CAUTION: Do not look at the infrared light.
5. After pressing one of the three start buttons (9), you will hear a sound and the vacuum will start
working.
6. The device will take 30-60 minutes to clean a regular sized room. When the battery is running low,
the battery level indicator (8) will turn red and the system will switch off automatically.
The robotic vacuum is simple to use and requires minimal maintenance. To guarantee optimum
performance, always follow these steps:
Cleaning the removable tank (10)
There are two ways to remove dust and dirt from the tank:
1. Empty the removable tank (10):
a) Turn off the device.
b) Depress the tab on the tank (10) and remove it as shown in the following diagrams:
c) Clean the tank (10).
2. Clean the filter (5):
a) Place the tank (10) upside down.
b) Lightly press the button and remove the filter (5) as shown in the following diagram:
13