Tabla de contenido
Publicidad
DO9079KR
OPTIONAL: FOOD PROCESSOR DO9072KR-F
PARTS
1. Fill opening with food pusher
2. Lid
3. 3 l bowl
4. Axis
5. Disc for cutting fries (sticks)
6. Fine grate
7. Rough grate
8. Disc for slices
USE
1. Make sure that the stand mixer is switched off and unplugged.
2. Make sure that the multifunctional head of the stand mixer is in its horizontal
position and remove the cover at the top of the head.
3. Make sure that the axis of the food processor is well assembled into the bowl,
through the opening at the bottom.
Place the food processor bowl on the left
connection and lock the bowl by turning it
counterclockwise.
4. Slide one of the discs over the top of the axis.
Always only use 1 disc at a time!
5. Place the lid on the bowl and lock the lid by
turning it counterclockwise.
6. Plug in the plug of the stand mixer.
7. Add the ingredients through the fill opening. Use the
food pusher to evenly press the ingredients into the bowl.
Use the speed control of the stand mixer to operate the
food processor.
8. Switch off the stand mixer after use.
Caution:
•
Use fresh ingredients and be sure not to cut them up into pieces that are too small.
•
Never put your fingers in the fill opening.
•
Be careful, the discs (blades) are sharp.
7
8
70
4
5
1
2
3
6
Publicidad
Tabla de contenido
