Operation
2
Battery
1. Battery Installation
Install the battery by putting the battery guide-
post (1) along the battery groove (2) to the end .
Then press the battery release button to put the
1
battery right in place .
2. Battery release
3
Press the battery release button (3) to take out
the battery along the groove .
3. Charging the battery
Use the battery charger to charge the battery . The
charging time is about 3 hours . The charging sta-
tus will be indicated by the light on the charger .
It is red while charging and will change to green
when the battery is fully charged .
Battery charger plug-in
27