boso medicus prestige Manual Del Usuario página 32

Setting the Time Signal Function
Your boso-medicus prestige is fitted with a time signal
function giving a maximum of three acoustic time signals
as a reminder that another measurement of your blood
pressure and / or taking of medication is necessary. In the
year mode setting (see page 31) up to 3 time signals
(P-1, P-2, P-3) can be programmed by lightly pressing „M".
Individual time signals are set as follows:
U press -button for 2 seconds, release
date set mode (year flashes) . . .
U press <M>-button, release
signal 1 set mode (P-1, hour flashes)
. . . set with <START>-button
U press -button and release immediately
signal 1 set mode (P-1, minute flashes)
. . . set with <START>-button
U press <M>-button and release immediately
signal 2 set mode (P-2, hour flashes)
. . . set with <START>-button
U press -button and release immediately
signal 2 set mode (P-2, minute flashes)
. . . set with <START>-button
32
U press <M>-button and release immediately
signal 3 set mode (P-3, hour flashes)
. . . set with <START>-button
U press -button and release immediately
signal 3 set mode (P-3, minute flashes)
. . . set with <START>-button
U press <M>-button and release immediately
set mode time
The set time signals are now activated – the display
shows „P".
To deactivate the time signals, press
immediately. The „P" on the display disappears, the time
signals are deactivated.
For reactivation of the time signals press the
release immediately. When the time signals are activated
the display shows „P". To activate the time signals at least
one time signal must be set.
The sound of the signal can be stopped by pressing the
<M>- or START-button.
The time signals do not appear while measurements are in
progress.
-button and release
-button and