Transferring Data; Changing Battery - Fora ADVANCED pro GD40 Manual Del Usuario

Appendix

Transferring Data

There are two types of connection (either USB/RS-232 or
Bluetooth) to transfer results. Please check your device box for the
transmission method of your device.
1. Data Transmission Via USB/RS-232 Cable (For TD-4272G /
GD40g model only)
i. Install the software on your computer
Download Health Care System Software and instruction
manual provided on the ForaCare Suisse AG Web site:
http://www.foracare.ch. Follow the instructions to install the
software on your computer.
ii. Connect the device with your computer using a USB/
RS-232 cable
"PC" will appear on the display, indicating that the device is
ready to transmit data. (t)
iii. Transfer data to your computer
Follow the software on-screen instructions to transmit data.
The data transmitted will include results with date and time.
Remove the cable and the device will automatically turn off.
2. Data Transmission Via Bluetooth (For TD-4272H / GD40h
model only)
i. Install the software on your computer
Download Health Care System Software and instruction
manual provided on the ForaCare Suisse AG Web site:
http://www.foracare.ch. Follow the instructions to install the
software on your computer.
ii. Connect the device with your computer
With the device turned off, slide the Bluetooth switch on
the device to initiate the data transmission. The Bluetooth
indicator flashes in blue.
iii. Transfer data to your computer
Follow the software on-screen instructions to transmit data.
The data transmitted will include results with date and time.
Note:
• Make sure your PC has Bluetooth capability before transmitting the
data and the device is within the receiving range.
• When the device is connected to the PC, it is unable to perform any
blood glucose or β-Ketone test.
Maintenance

Changing Battery

When the battery is low, the "
To change the batteries, do the following:
1. Press the edge of the battery cover and lift it up to remove the
cover.
2. Remove the old batteries and replace them with two 1.5V AA
size alkaline batteries.
EN-10
" icon appears with E-b. (u)