Getting Started; Initial Setup - Fora ADVANCED pro GD40 Manual Del Usuario

Getting Started

Initial Setup

Before using the device for the first time or after you have changed the batteries, enter the following initial setup process:
Step 1: Enter the Setting Mode
Open the battery cover and press SET. The display turns on.
Step 2: Configuring the Settings (Date, Time Format, Time, Universal Tone, Memory Deletion)
Press MAIN repeatedly to adjust the value or enable/disable the setting. Then press SET to confirm the setting and switch to another
field.
Set [Year] Set [Month] Set [Day] Set [Time Format] Set [Hour] Set [Minute] Set [Beep On,
Universal Tone,
Beep Off ]
Note:
• You may set up Beep On, Universal Tone On and Beep Off by pressing M to change it. (v)
• When Universal Tone is turned on, the meter guides you through the blood glucose test in a
series of beep tones; it also outputs the result as a series of beeps.
• During memory deletion, select 'No' to keep all saved results.
• If the device is idle for 3 minutes during the setting mode, it will turn off automatically.
Delete Memory
Records
EN-4