Troubleshooting - sunjoe 24V-X2-DTS15 Manual Del Operador

Troubleshooting

m
WARNING!
Only perform the steps described within these instructions!
All further inspection, maintenance and repair work must be performed by an authorized service center or a similarly qualified
specialist if you cannot solve the problem yourself!
Suspected malfunctions, disturbances or damages are often due to causes that the user can fix themselves. Follow the below
troubleshooting guidelines when checking the unit. In most cases, the problem can be resolved quickly and the dethatcher can
be restored to proper working order.
Problem
Motor does not start
Product does not reach
full power
Unsatisfying result
Possible Cause
a) Batteries are not inserted properly
b) Batteries are flat
c) Other electrical defect to the product
d) Safety lock button is not pressed
a) Batteries are almost flat
b) Air vents are blocked
a) Cutting device worn
b) Scarified material exceeds capacity
c) Scarifying depth is incorrect
18
Solution
a) Reinsert the batteries
b) Charge the batteries
c) Contact an authorized service agent
d) Press safety lock button first, then the
start/stop lever
a) Charge the batteries
b) Clean the air vents
a) Replace the tine cylinder (see page 15)
b) Only scarify materials according to
capacity of the product
c) Adjust depth