Product Components; Use And Maintenance; Battery Charging - Omega PB-2103 Manual De Instrucciones

EN

3. product components

6

4. use and maintenance

1. Remove the machine, install the lithium battery, press and hold the power switch, and then release it. After hearing the sound
means that the battery is charged.
2. Press the trigger continuously and quickly twice to automatically open the blades.
3. Before working, press the trigger to operate the blade emptily for several times and listen if there is a noise or if it is running too
fast or too slow. After it is normal, start working.
4. Choice of blade operation size: press the trigger, and when the sound of "di" is heard, release the trigger immediately, and the
chosen blade aperture size will be held automatically
5. Power off: press the trigger and release it after hearing "dididi" for three times; the blade will automatically close.
6. Power off switch.
NOTE: After the end of the pruning season or when replacing the blade, it is necessary to remove the blade and add lubricating oil

Battery charging:

The battery is not fully charged. Before charging, place the battery into the charger
and insert the charger plug into the power socket. As shown in the image below, the
charger indicator light shows red, indicating that it is charging; when it turns green it
means that is fully charged. After a first full charge you can use the battery.
3
1
2
1. Moving blade
2. Fixed blade
3. Dowel
4. Trigger
5. Lithium battery
6. Chrager
7. Power switch
4 4
4
7
5