Omega PB-2103 Manual De Instrucciones página 18

EN
5. General Security Advice
warning!
Please read all security instructions carefully. If not, it may cause electric shock, fire or other serious damage. Keep
all safety instructions for future reference.
Work area safety:
1. Keep the entire workplace clean and well lit. Cluttered or dark areas oscuras o llenas de objetos son propensas a accidentes.
2. Do not operate pruning shears in explosive atmospheres, such as in the presence of flammable liquids, gases or dust . Power
tools create sparks, which may ignite the dust or fumes.
3. Keep children and others away while operating the pruning shears. Distractions can cause you a loss of control.
Electric aspects:
1. Pruning shears plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed
(grounded). Modified plugs and a mismatch between outlets increases the risk of electrical shock.
2. Do not expose power tools to rain or moisture. The risk of electric shock increases if water gets into a power tool.
3. Do not force the power cord. Do not use the cord to drag, pull, or unplug the tool. Keep the cord away from heat, oil, sharp
edges, and moving parts. The risk of electric shock increases when the cord is damaged or tangled.
Personal safety:
1. Never operate the pruning shears when you are fatigated, ill, upset or under the influence of medication that may make you
drowsy or if you are under the influence of alcohol or drugs.
2. Use safety footwear, snug fitting clothing and eye, hearing and head protection devices.
3. Before starting the pruning shears, remove all adjustable wrenches or wrenches. Wrenches left on rotating parts of electric
pruning shears can cause personal injury.
4. Hands should stay away from cutting areas. To avoid accidents, operate in a comfortable posture that allows you constantly
maintain balance.
5. Dress appropriately. Do not wear loose clothing, accessories, or long hair that can get caught in moving parts.
Abnormalities:
1. The user must release the trigger when the blade gets stuck with the branches. The blade will return to the fully open position.
2. When the branches are too stiff, release the trigger and the moving blade will automatically return to the open state.
3. When the batteries cannot be charged normally, firstly check if the charger is included in the product. Secondly, check if the
charging voltage matches the nameplate voltage
4. If there are electrical or mechanical faults, close the switch immediately.
5. If the instructions for use are not followed, the batteries may erupt. Do not come into contact with the liquid, if accidentally come
into contact, rinse it with clean water If the liquid gets into the eyes, see a doctor immediately in addition to rinsing with clean water.
Liquid leaking from batteries can cause stimulation or burns.
8 8