Blades Sharpening; Blades Replacement - Omega PB-2103 Manual De Instrucciones

EN
Issues to consider:
1. Before charging, turn off the switch. During the charging process, it is normal for the charger and batteries to get slightly warm.
2. If the batteries are not used for a long time, they must be recharged for 3 months to prolong its service life.
3. New batteries or batteries that have not been used for a long time will reach maximum capacity after 5 charge-discharge cycles.
4. Do not charge the batteries repeatedly after several minutes of operation, as this can reduce the working time and the effec-
tiveness of the batteries.
5. Do not use damaged batteries or disassemble the charger or batteries.
6. Batteries explode in fire. Do not burn them.
7. Do not charge the batteries in a humid environment or outdoors.
8. With the gradual deduction of the electric quantity of the battery, it is normal to reduce the cutting capacity of the diameter.
9. Do not use cordless electric pruning shears when charging.

Blades sharpening:

1. Open the blades and remove the battery.
2. Both sides of the movable blade are polished using oil stone forming the section angle with the blade.
3. After polishing the blade, clean it, connect it to the power line, reactivate it, close the blade and finish it.

Blades replacement:

1. To ensure safety, remove the battery.
2. To replace the blades, follow the steps below.
3. After replacement, clean it, start it up for testing, close the blade and complete.
1. Remove the screws with a screw-
driver and open the cover.
2. Remove the screws from the bla-
de nut retaining buckle (this step is
critical).
5 5
3. Remove the blade nut.