Delta TALBOTT 16968-DST Serie Manual Del Usuario página 3

A.
1
1
2
4
3
Alternative Hose Installation
Spout Installation
Insert hose guide (1) into hose end (2)
A.
as shown. Verify that the friction washer
(3), clip (4) and spout ring (5) are
present on spout assembly. Feed hose
assembly (6) through spout and hub.
Alternative Hose Installation
An alternative to this method is to
feed the hose through the spout and
hub after they are mounted. Turn
spout opposite handle for this method.
It may take several attempts to feed
hose using this method.
B.
6
2
5
1
C.
Align button (1) on clip with hole in
B.
back of spout (2). Using back and forth
motion insert spout assembly onto main
hub until clip button snaps into hole in
hub. Use caution not to pinch fingers.
Attach sprayer (1) to end of hose to
C.
keep hose in place. Rotate spout
assembly to ensure smooth operation.
3
1