Installation Instructions - Twin Star DFH-CH-11-T Manual De Operación

INSTALLATION INSTRUCTIONS

NOTE: It is normal for the oil to move inside the radiator when moving the product.
1. Place the product upside down on a flat, stable surface, ensuring it will not tip over.
1
2. Remove the Wing Nuts from the U-Bolts.
3. Place a U-Bolt between the last and
second-to-last Fin of the product,
align the center holes in the rounded
side of the Caster Bracket with the
U-Bolt, and then tightly secure using
the Wing Nuts (Figures 1-3).
NOTICE: Do not over-tighten the Wing
Nuts.
4. Repeat Step 3 for the remaining
U-Bolt/Caster Bracket between the
first and second Fin, ensuring the
holes in the side of the Bracket align
with the protruding Bolts of the
product.
5. Set the product upright and wait at least three minutes for the oil to settle before
turning on.
2
E-4
3
Correct Incorrect